How to Choose a Drill Bit
Which drill bit to use for metal, wood and concrete, and what the shank types mean.
Match the bit to the material
HSS (high-speed steel) twist bits are the usual choice for metal. Masonry bits with a hard tip are for brick and concrete. Wood is drilled with brad-point or flat wood bits.
Use a hammer action for masonry
Masonry bits are meant for a drill with hammer action. For repeated work in concrete, a rotary hammer with SDS bits is faster and easier on the tool.
Check the shank
Straight round shanks fit a standard drill chuck. SDS shanks fit only SDS rotary hammers. Large metal bits may have a taper shank that needs a matching machine or sleeve.
Get the size right
Bit diameter is the hole size. For tapping a thread, the hole must be the correct tap-drill size for that thread, so check the tap chart before drilling.
Keep bits sharp and cool
Use a slower speed for larger holes and for harder metal. Use cutting oil on steel. A dull bit overheats, so sharpen or replace it.
See cutting, bits and abrasives in our catalogue Ask us on WhatsApp
This is general guidance. Always follow the instructions and safety rating that come with your tool.
Karuvi Enterprises, TrichyCall 96292 78144