How to Choose a Spanner
Open-end, ring and combination spanners, how sizes work and which set to buy.
Know the types
Open-end spanners slip onto a nut from the side. Ring (box) spanners grip all around and are better for tight nuts. Combination spanners have an open end and a ring end of the same size. Double-ended spanners have two different sizes.
Measure the nut, not the guess
Spanner sizes are the distance across the flats of the nut, usually in millimetres. Check whether your fasteners are metric or inch sizes, because the wrong size rounds off the corners.
A set is usually better than single spanners
A combination set covers the common sizes and keeps them together. Buy single spanners later for the sizes you use most.
Look at the finish and fit
The jaws should fit the nut closely with little play. Clean, smooth forging and good plating resist rust and wear.
Use it safely
Pull the spanner towards you rather than pushing. Do not use a pipe on the handle to add leverage on a normal spanner, and do not hammer on it unless it is made for that.
See hand tools in our catalogue Ask us on WhatsApp
This is general guidance. Always follow the instructions and safety rating that come with your tool.
Karuvi Enterprises, TrichyCall 96292 78144